HP/Compaq All-in-One 18-2001LA Specs & Upgrades
The HP/Compaq All-in-One 18-2001LA uses DDR3 SODIMM PC3-10600 1333MHz memory upgrades as listed in the detailed specifications below. All memory and other upgrades compatible with this system are listed on this page.
Need Assistance?
Please call and speak with one of our expert technicians at 800-240-8577 or US 404-935-4048
to verify exact system specs before ordering.
Memory Type | DDR3 SODIMM PC3-10600 1333MHz |
---|---|
Base Memory | 2GB (Removable) or 3GB (Removable) or 4GB (Removable) |
Upgrade Slots | 2 Socket(s) |
Maximum Memory | 4GB |
Maximum Module Size | 2GB |
CPU & Chipset | Intel Atom / Intel NM10 |
Bus Architecture | Flash - SDHC; SSD - SATA 2.5-inch 9.5mm; USB |
Notes | Important: MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode. If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). Maximum configurations require a 64-bit operating system. System supports DDR3 1066 and 1333 modules but memory bus runs at 1066MHz. |
Manufacturer Part Numbers |
|
Available Upgrades
Part Number 722C9
1333MHz
204pin
CL9
In Stock
|
$15.99
|
|
Part Number 722C9H
1333MHz
204pin
CL9
In Stock
|
$24.99
|
|
Part Number SSD/80G
Call to Order
|
$123.99
View Product
|
|
Part Number SSD/80GH
Call to Order
|
$199.99
View Product
|
Part Number 722C9
1333MHz
204pin
CL9
In Stock
|
$15.99
|
|
Part Number 722C9H
1333MHz
204pin
CL9
In Stock
|
$24.99
|
Upgrade References
The table below are references to other manufacturer part numbers which are specific to this device, have identical specifications to our components. This information is made available for your reference.Part# | Source | References | |
---|---|---|---|
KTH-X3BS/2G | 2GB DDR3 PC3-10600 1333MHz SODIMM | Kingston | 722C9 |
SH103S3/480G | 80GB Solid State Drive | Kingston | SSD/80G |
SH103S3B/480G | 480GB Kit of 2 240GB Solid State Drive | Kingston | SSD/240G-2 |
SKC300S37A/480G | 80GB Solid State Drive | Kingston | SSD/80G |