Cisco Wide Area Virtualization Engine WAVE-694 Specs & Upgrades
The Cisco Wide Area Virtualization Engine WAVE-694 uses DDR3 DIMM ECC REG PC3-12800 1600MHz memory upgrades as listed in the detailed specifications below. All memory and other upgrades compatible with this system are listed on this page.
Need Assistance?
Please call and speak with one of our expert technicians at 800-240-8577 or US 404-935-4048
to verify exact system specs before ordering.
| Memory Type | DDR3 DIMM ECC REG PC3-12800 1600MHz |
|---|---|
| Base Memory | 16GB (Removable) |
| Upgrade Slots | 6 Socket(s) |
| Maximum Memory | 24GB |
| Maximum Module Size | 4GB |
| CPU & Chipset | ~ |
| Bus Architecture | PCI; PCI Express; SSD - SATA 2.5-inch 9.5mm |
| Notes | Important: MODULES MUST BE ORDERED AND INSTALLED IN PAIRS. Quantum's DDR3-1600 RDIMMs will run at the highest supported system speed. |
| Manufacturer Part Numbers |
|
Available Upgrades
|
Part Number 834ERTC9
1600MHz
240pin
CL9
Registered
Thermal Sensor
ECC
In Stock
|
$37.99
|
|
Part Number 834ERTC9H
1600MHz
240pin
CL9
Registered
Thermal Sensor
ECC
In Stock
|
$59.99
|
|
Part Number SSD/80G
Call to Order
|
$123.99
View Product
|
|
Part Number SSD/80GH
Call to Order
|
$199.99
View Product
|
|
|
Part Number 834ERTC9
1600MHz
240pin
CL9
Registered
Thermal Sensor
ECC
In Stock
|
$37.99
|
|
|
Part Number 834ERTC9H
1600MHz
240pin
CL9
Registered
Thermal Sensor
ECC
In Stock
|
$59.99
|
Upgrade References
The table below are references to other manufacturer part numbers which are specific to this device, have identical specifications to our components. This information is made available for your reference.| Part# | Source | References | |
|---|---|---|---|
| D51272K1118 | 4GB DDR3 PC3-12800 1600MHz ECC REG Thermal Sensor DIMM | Kingston | 834ERTC9 |
| SH103S3/480G | 80GB Solid State Drive | Kingston | SSD/80G |
| SH103S3B/480G | 480GB Kit of 2 240GB Solid State Drive | Kingston | SSD/240G-2 |
| SKC300S37A/480G | 80GB Solid State Drive | Kingston | SSD/80G |