The Cisco 7200 Series NPE-175/NPE-225 uses SDRAM DIMM ECC REG PC100 100MHz memory upgrades as listed in the detailed specifications below. All memory and other upgrades compatible with this system are listed on this page.

Need Assistance? Please call and speak with one of our expert technicians at 800-240-8577 or US 404-935-4048 to verify exact system specs before ordering.
Memory Type SDRAM DIMM ECC REG PC100 100MHz
Base Memory 0MB (Removable) Flash Cards 64MB (Removable) DRAM
Upgrade Slots 1 Socket for DRAM 2 Slots for Flash Cards
Maximum Memory 40MB Flash Cards 256MB DRAM
Maximum Module Size
CPU & Chipset MIPS R5000 RISC 200 MHz MIPS R5000 RISC 262 MHz
Bus Architecture ~
Part Number 11.2ERC3
100MHz 144pin CL3 Registered ECC
In Stock
$41.99
View Product
Part Number 11.2ERC3H
100MHz 144pin CL3 Registered ECC
In Stock
$67.99
View Product
Part Number 11.2ERC3
100MHz 144pin CL3 Registered ECC
In Stock
$41.99
View Product
Part Number 11.2ERC3H
100MHz 144pin CL3 Registered ECC
In Stock
$67.99
View Product

Upgrade References

The table below are references to other manufacturer part numbers which are specific to this device, have identical specifications to our components. This information is made available for your reference.
Part# Source References
KCS-D72NSE/256 256MB SDRAM PC100 100MHz ECC REG SODIMM Kingston 11.2ERC3
KCS-D72VXR/64 64MB Module Kingston
KCS-D72VXR/128 128MB Module Kingston
KCS-FC7200/8 8MB Flash Card Kingston
KCS-FC7200/16 16MB Flash Card Kingston
KCS-FC7200/20 20MB Flash Card Kingston